Ceramic tile sewing has become an important part of many people's home decoration, has been favored by more and more families, it can not only prevent mold, improve the beauty and cleanliness of the ground, but also make cleaning the toilet more simple and easy later. Usually in the decoration will not save this project, some people choose to invite professional sewing master to do, some people choose to do their own, relatively speaking, to do ceramic tile sewing is more economical, but if you do it yourself, you can do it yourself, but if you do it yourself, you will be able to do it yourself, but if you do it yourself, Still need to master a certain operational skills, may seem simple, but ceramic tiles to do good seams, if you do not do these 3 points, maybe it is a waste of effort and money!
瓷砖做美缝，一般会用到以下工具：橡胶指套、美纹纸，刮刀、硅胶枪，压边小球，美工刀，吸尘器，毛刷等。我们建议最好在贴完瓷砖最少一礼拜之后再做，以保证瓷砖的稳固，不会影响后期做美缝的效果。
1. Clean up the gap, the house in the renovation will inevitably have some cement, dust or sawdust and so on fall into the gap, before making a good seam must be thoroughly cleaned, this is a very important key step, If the tile gap is not cleaned up, not only construction is not easy to glue, but also very easy to lead to shedding later, wasted money and effort. Clean up the gap is a physical work, do not be afraid of tired, must be careful, you can first use a vacuum cleaner, for those particles that can not be sucked away, and then with a small brush to clean up. After cleaning up, please remember to put up beautiful paper on both sides of the ceramic tile crevice, not only walk beautifully, but also will not make the stitching agent everywhere, greatly reducing the workload.
2. Start the glue. Before you glue the glue, you must be familiar with the operation of the lower glue gun. Do not wait till the construction. The colloid is not fully mixed. Therefore, it is necessary to squeeze a part of the joint agent, so that the colloid of 20 to 30 cm of the head must be squeezed out, and then a special careful caulking procedure is required. It is recommended that the gloves be put on your hands to avoid sticking to the hand. Please remember that the glue is easy to stick in one direction or the cross or the longitudinal direction, or the colloid of the intersection is easy to stick, and the effect is beautiful. The glue gun button shall be up and released immediately after the glue is stopped, so as to prevent the colloid from continuing to overflow to the ceramic tile.
3. After stitching, a good stitch in one direction should be sewed immediately, otherwise it will be dry for a long time, it will not be easy to operate, squash ball, small plastic scraper can all choose to use, according to their own habits. When scraping, remember, along one direction, try to achieve uniformity, fullness, do not go back and forth many times of compaction or scraping. After evenly spreading the lacquer in the ceramic tile crevice, please tear off the paper immediately, and don't wait until it is dry. It will stick with you. Remember. After tearing off the embossed paper, the tiles are accidentally covered with a stitching agent and can be repaired with a scraper. Success, is not very simple, the next wait 72 hours, the sewing agent dry can move around.
Finally, it should be reminded that decoration and sewing must be patient, do not act too quickly, a ceramic tile crevice orderly do, from cleaning to glue, the final process for a process of seams, do not want to fast, The above 3 points must be done well, so as not to waste effort and money. Finally, I wish you all the perfect stitch.
